High Voltage LED Neon Strip

Product Description

The ART-NS1212 is an Arraystar High Voltage LED Neon Strip. It uses 2835s at 120LEDs/m, on 200-240V AC, drawing around 12 W/m, in 1800K, 2700K, 3000K, 4000K, 6000K.

It features CRI >80, a 12*12mm profile. Because it runs on mains voltage, it covers long building outlines with fewer power feeds than a low-voltage strip.

Key Features

• 2835 at 120LEDs/m
• Input: 200-240V AC
• Power: 12 W/m
• CRI >80
• Colour options: 1800K, 2700K, 3000K, 4000K, 6000K
• Warranty: 3 Years

Typical Applications

• Long building and rooftop outlines
• Large perimeter and contour lighting
• Outdoor signage with minimal power points
• Landscape and bridge lighting
• Industrial and commercial long-run projects

Frequently Asked Questions

Do I need an LED driver for this strip?

No. It runs directly on mains voltage (200-240V AC), so it suits long runs without a driver every few metres. A qualified electrician must fit the rated mains head connector and weatherproof junction.

How far can it run from one power feed?

High-voltage operation allows long single-feed runs (typically the rated run length). Always observe the maximum run and use the rated head connector.

Is this strip waterproof?

Check the IP rating for the specific model. IP-rated variants and sealed connectors are available for outdoor or wet locations; ask us to confirm the correct version.

Which colour temperatures are available?

1800K, 2700K, 3000K, 4000K, 6000K

Does it come in fixed lengths?

It is supplied in rated run lengths with the mains head connector fitted and sealed. Do not cut the high-voltage strip on site; tell us the lengths you need and we supply them ready to install.