LED Power Supply

Product Description

The ART-200WHB-12 / ART-200WHB-24 is an LED power supply (driver) from the Arraystar accessory range. It converts mains voltage to the constant low-voltage DC that LED strips require, delivering 200W at 12V DC / 24V DC.

A correctly sized driver protects the strip from voltage fluctuation and flicker. Always size the driver about 20% above the total wattage of the run, and use a waterproof (IP-rated) driver for outdoor or damp locations.

Key Features

• Output: 200W
• Output voltage: 12V DC / 24V DC
• Aluminum housing
• Overload, short-circuit and over-temperature protection
• IP-rated options for outdoor use
• Sized with ~20% headroom recommended

Typical Applications

• Powering LED strip runs in cove and furniture lighting
• Retail display and signage lighting
• Commercial and architectural linear projects
• Outdoor and wet-area installations (IP-rated models)
• Multi-zone projects with several drivers

Frequently Asked Questions

What wattage driver do I need?

Add up the strip wattage and add about 20% headroom. This model is rated at 200W; send us your run length and we will size it.

Is it constant voltage?

Constant-voltage LED strips require a constant-voltage driver matched to the strip voltage (12V or 24V); confirm the model before ordering.

Can it be used outdoors?

Use an IP-rated (waterproof) driver in damp or outdoor locations; non-IP drivers are for dry interiors only.

Can it be dimmed?

Dimmable models are available for leading/trailing-edge or 0-10V/DALI systems; confirm dimming compatibility with your control.

How many strips can one driver power?

As many as fit within the rated wattage, with the runs wired in parallel. Overloading the driver shortens its life.