info@arraystarled.com
Email Us
ART-SC01-IP68 IP68 Waterproof WiFi LED Controller
- Model:ART-SC01-IP68
- LED Type:DIM, CCT, RGB, RGBW, RGBWC LED lights
- LED Qty/M: Not specified
- Voltage:DC 12–24V
- Power W/m: Not specified
- CCT/Color:Single color, CCT, RGB, RGBW, RGBWC
- CRI:Not specified
- Dimension:155×70×30 mm
- Warranty:Not specified
Product Description
The ART-SC01-IP68 is an LED cabinet sensor switch from the Arraystar accessory range. It provides proximity control of furniture and cabinet strips, switching and dimming the light automatically or by a touch on DC 12–24V.
The sensor mounts behind a panel or inside the cabinet, so the control stays hidden and the furniture surface remains clean. Keep within its current rating or add an amplifier for longer runs.
Key Features
- Proximity control
- Input/output: DC 12–24V
- Hides behind panel or glass
- Memory of last brightness
- Compact in-line wiring
Typical Applications
- Kitchen and bathroom cabinet lighting
- Wardrobe and mirror lighting
- Furniture and display built-ins
- Touch-activated shelves and vanity units
- Single-run strips needing simple control
Frequently Asked Questions
How many watts can it handle?
Stay within the rated current (see the datasheet), or add a power amplifier. For example, 5A covers 60W at 12V or 120W at 24V.
Will it work through glass or wood?
Touch and proximity sensors work through thin non-metallic panels; metal blocks the signal. Test sensitivity through the finished panel first.
Does it remember the dim level?
Most of these sensors return to the last brightness after switching off; confirm on the model datasheet.
How is it installed?
Wire it between the driver and the strip with correct polarity, and fix it against a clean, non-metallic surface.
Can it control a long run?
Use an amplifier when the run exceeds the rated current of the sensor.