info@arraystarled.com
Email Us
| Model | ART-COB12-896-X-48 |
|---|---|
| LED Type | COB LED |
| LED Density | 896 LEDs/m |
| Voltage | 48V DC |
| Power (W/m) | 16 W/m |
| CCT/Colour | RGB+3000K |
| CRI | / |
| Dimension | 12mm 3oZ PCB |
| Warranty | 3 years |
| Minimum Order Quantity | Factory-direct - on request |
| Certifications | CE, RoHS, UKCA; UL 1598C (Cert. E501132, selected models) |
The ART-COB12-896-X-48 is an Arraystar 48V Long Run COB LED Strip. It uses COB LEDs at 896 LEDs/m, on 48V DC, drawing around 16 W/m, in RGB+3000K, delivering a continuous, dot-free line.
It features a 12mm 3oZ PCB profile. It is a flexible, cuttable strip for linear, cove and accent lighting.
A 48V DC constant-voltage LED driver sized for the total wattage (about 16 W/m, plus around 20% headroom). Ask us to size the driver and wiring for your run length.
DC strips can dim at the far end of a long run. Re-feed power at the recommended intervals and use the correct cable size; we confirm the layout for your project.
Check the IP rating for the specific model. IP-rated variants and sealed connectors are available for outdoor or wet locations; ask us to confirm the correct version.
Yes, cut only at the marked cut points, then reconnect with matching connectors. The cut interval is shown on the model datasheet.
Use a matching RGB/RGBW controller or DMX/SPI system. We can supply the controller and wiring matched to this strip.