Free Cut COB LED Strip

Product Description

The ART-COB05F-480-X-24 is an Arraystar Free Cut COB LED Strip. It uses COBs at 480 LEDs/m, on 24V DC, drawing around 7W/m, in 2700K/3000K/4000K/6500K, delivering a continuous, dot-free line.

It features CRI >90, a 5MM profile, supplied 5m/roll. It is a flexible, cuttable strip for linear, cove and accent lighting.

Key Features

• COB at 480 LEDs/m
• Continuous, dot-free light output
• Input: 24V DC
• Power: 7W/m
• CRI >90
• Colour options: 2700K/3000K/4000K/6500K
• Strip width 5MM
• Warranty: 5 years

Typical Applications

• Dot-free cove, perimeter and skirting lighting
• High-end hotel and hospitality interiors
• Retail shelf, window and display lighting
• Seamless architectural linear fixtures
• Jewellery and museum-style accent lighting

Frequently Asked Questions

What power supply does this strip need?

A 24V DC constant-voltage LED driver sized for the total wattage (about 7W/m, plus around 20% headroom). Ask us to size the driver and wiring for your run length.

Will I see voltage drop on a long run?

For DC runs we recommend re-feeding power at the recommended intervals (usually every 5m) to keep the light even to the end. Our team confirms the feed points for your layout.

Is this strip waterproof?

Check the IP rating for the specific model. IP-rated variants and sealed connectors are available for outdoor or wet locations; ask us to confirm the correct version.

Can I cut it on site?

Yes, cut only at the marked cut points, then reconnect with matching connectors. The cut interval is shown on the model datasheet.

Which colour temperatures are available?

2700K/3000K/4000K/6500K