RGB&RGBW COB LED Strip

Product Description

The ART-COB10-450-RGB-24 is an Arraystar RGB & RGBW COB LED Strip. It uses COB LEDs at 450 LEDs/m, on DC 12V/24V, drawing around 15 W/m, in RGB, delivering a continuous, dot-free line.

It features a 10 mm PCB profile. It is a flexible, cuttable strip for linear, cove and accent lighting.

Key Features

• COB LED at 450 LEDs/m
• Continuous, dot-free light output
• Input: DC 12V/24V
• Power: 15 W/m
• Colour options: RGB
• Warranty: 3-5 years

Typical Applications

• Dot-free cove, perimeter and skirting lighting
• High-end hotel and hospitality interiors
• Retail shelf, window and display lighting
• Seamless architectural linear fixtures
• Jewellery and museum-style accent lighting

Frequently Asked Questions

What power supply does this strip need?

A DC 12V/24V constant-voltage LED driver sized for the total wattage (about 15 W/m, plus around 20% headroom). Ask us to size the driver and wiring for your run length.

Will I see voltage drop on a long run?

DC strips can dim at the far end of a long run. Re-feed power at the recommended intervals and use the correct cable size; we confirm the layout for your project.

Is this strip waterproof?

Check the IP rating for the specific model. IP-rated variants and sealed connectors are available for outdoor or wet locations; ask us to confirm the correct version.

Can I cut it on site?

Yes, cut only at the marked cut points, then reconnect with matching connectors. The cut interval is shown on the model datasheet.

How do I control the colours?

Use a matching RGB/RGBW controller or DMX/SPI system. We can supply the controller and wiring matched to this strip.