RGB&RGBW COB LED Strip

Product Description

The ART-FCOB1205-420-24 is an Arraystar RGB & RGBW COB LED Strip. It uses FCOBs at 420 LEDs/m, on 24V DC, drawing around 12W/m, in Addressable RGBW Dream Color, delivering a continuous, dot-free line.

It features CRI >90, a 12mm profile, supplied 5m/roll. It is a flexible, cuttable strip for linear, cove and accent lighting.

Key Features

• FCOB at 420 LEDs/m
• Continuous, dot-free light output
• Input: 24V DC
• Power: 12W/m
• CRI >90
• Colour options: Addressable RGBW Dream Color
• Strip width 12mm
• Warranty: 5 years

Typical Applications

• Dot-free cove, perimeter and skirting lighting
• High-end hotel and hospitality interiors
• Retail shelf, window and display lighting
• Seamless architectural linear fixtures
• Jewellery and museum-style accent lighting

Frequently Asked Questions

What power supply does this strip need?

A 24V DC constant-voltage LED driver sized for the total wattage (about 12W/m, plus around 20% headroom). Ask us to size the driver and wiring for your run length.

Will I see voltage drop on a long run?

For DC runs we recommend re-feeding power at the recommended intervals (usually every 5m) to keep the light even to the end. Our team confirms the feed points for your layout.

Is this strip waterproof?

Check the IP rating for the specific model. IP-rated variants and sealed connectors are available for outdoor or wet locations; ask us to confirm the correct version.

Can I cut it on site?

Yes, cut only at the marked cut points, then reconnect with matching connectors. The cut interval is shown on the model datasheet.

What controller or protocol does it need?

It is addressable, so use a compatible controller for the IC/protocol of the ordered model. Confirm the protocol with us and we can supply the matching controller.