Waterproof COB LED Strip

Product Description

The ART-COB12SE-896-RGBW-48 is an Arraystar Waterproof COB LED Strip. It uses COB LEDs at 896 LEDs/m, on 48V DC, drawing around 16 W/m, in RGB + 2700K / 3000K / 4000K / 6500K white, delivering a continuous, dot-free line, rated IP67.

It features CRI >90 (white channel), a 12 mm profile, supplied not specified. It is a flexible, cuttable strip for linear, cove and accent lighting.

Key Features

• COB LED at 896 LEDs/m
• Continuous, dot-free light output
• Input: 48V DC
• Power: 16 W/m
• CRI >90 (white channel)
• Colour options: RGB + 2700K / 3000K / 4000K / 6500K white
• IP67 sealed construction
• Strip width 12 mm

Typical Applications

• Dot-free cove, perimeter and skirting lighting
• High-end hotel and hospitality interiors
• Retail shelf, window and display lighting
• Seamless architectural linear fixtures
• Jewellery and museum-style accent lighting

Frequently Asked Questions

What power supply does this strip need?

A 48V DC constant-voltage LED driver sized for the total wattage (about 16 W/m, plus around 20% headroom). Ask us to size the driver and wiring for your run length.

Will I see voltage drop on a long run?

DC strips can dim at the far end of a long run. Re-feed power at the recommended intervals and use the correct cable size; we confirm the layout for your project.

Is this strip suitable for outdoor use?

It carries an IP67 rating. Outdoor or wet installations still need sealed connectors and proper end sealing to maintain the rating.

Can I cut it on site?

Yes, cut only at the marked cut points, then reconnect with matching connectors. The cut interval is shown on the model datasheet.

How do I control the colours?

Use a matching RGB/RGBW controller or DMX/SPI system. We can supply the controller and wiring matched to this strip.