3D Flex Wall Washer Strip

Product Description

The ART-WL2527-24-X-24 is an Arraystar 3D Flex Wall Washer Strip. It uses SMD 3030s at 24 LEDs/m, on 24V DC, drawing around 24W/m, in 2700K / 3000K / 4000K / 6000K, rated IP67.

It features CRI 80, a 25mm profile, supplied 5m/roll. The angled emitters wash a wall or facade evenly rather than lighting a narrow line.

Key Features

• SMD 3030 at 24 LEDs/m
• Input: 24V DC
• Power: 24W/m
• CRI 80
• Colour options: 2700K / 3000K / 4000K / 6000K
• IP67 sealed construction
• Strip width 25mm
• Warranty: 3 years

Typical Applications

• Wall and facade grazing
• Signage and billboard wash lighting
• Corridor and column accent lighting
• Landscape and feature-wall lighting
• Hotel lobby and commercial exterior washes

Frequently Asked Questions

What power supply does this strip need?

A 24V DC constant-voltage LED driver sized for the total wattage (about 24W/m, plus around 20% headroom). Ask us to size the driver and wiring for your run length.

Will I see voltage drop on a long run?

For DC runs we recommend re-feeding power at the recommended intervals (usually every 5m) to keep the light even to the end. Our team confirms the feed points for your layout.

Is this strip suitable for outdoor use?

It carries an IP67 rating. Outdoor or wet installations still need sealed connectors and proper end sealing to maintain the rating.

Can I cut it on site?

Yes, cut only at the marked cut points, then reconnect with matching connectors. The cut interval is shown on the model datasheet.

Which colour temperatures are available?

2700K / 3000K / 4000K / 6000K