3D Flex Wall Washer Strip

Product Description

The ART-WL2527-24-X-24 is an Arraystar 3D Flex Wall Washer Strip. It uses SMD 3030 / 3535 high powers at 24 LEDs/m, on 24V DC, drawing around 24 W/m, in 2700K / 3000K / 4000K / 6000K / RGBW / SPI / DMX512 options, rated IP67.

It features CRI >90 (white), a 25 mm profile, supplied not specified. The angled emitters wash a wall or facade evenly rather than lighting a narrow line.

Key Features

• SMD 3030 / 3535 high power at 24 LEDs/m
• Input: 24V DC
• Power: 24 W/m
• CRI >90 (white)
• Colour options: 2700K / 3000K / 4000K / 6000K / RGBW / SPI / DMX512 options
• IP67 sealed construction
• Strip width 25 mm
• Warranty: 3 years

Typical Applications

• Wall and facade grazing
• Signage and billboard wash lighting
• Corridor and column accent lighting
• Landscape and feature-wall lighting
• Hotel lobby and commercial exterior washes

Frequently Asked Questions

What power supply does this strip need?

A 24V DC constant-voltage LED driver sized for the total wattage (about 24 W/m, plus around 20% headroom). Ask us to size the driver and wiring for your run length.

Will I see voltage drop on a long run?

DC strips can dim at the far end of a long run. Re-feed power at the recommended intervals and use the correct cable size; we confirm the layout for your project.

Is this strip suitable for outdoor use?

It carries an IP67 rating. Outdoor or wet installations still need sealed connectors and proper end sealing to maintain the rating.

Can I cut it on site?

Yes, cut only at the marked cut points, then reconnect with matching connectors. The cut interval is shown on the model datasheet.

What controller or protocol does it need?

It is addressable, so use a compatible controller for the IC/protocol of the ordered model. Confirm the protocol with us and we can supply the matching controller.