Top Bend Flex Wall Washer Strip

Technical Specifications

Product Description

The ART-WL2010-112-X-24 is an Arraystar Top Bend Flex Wall Washer Strip. It uses 2835s at 112leds/m, on 24V DC, drawing around 30 W/m, in 2700K;3000K;4000K;6500K.

It features CRI >90, a 20*10mm profile. The angled emitters wash a wall or facade evenly rather than lighting a narrow line.

Key Features

• 2835 at 112leds/m
• Input: 24V DC
• Power: 30 W/m
• CRI >90
• Colour options: 2700K;3000K;4000K;6500K
• Warranty: 3 Years

Typical Applications

• Wall and facade grazing
• Signage and billboard wash lighting
• Corridor and column accent lighting
• Landscape and feature-wall lighting
• Hotel lobby and commercial exterior washes

Frequently Asked Questions

What power supply does this strip need?

A 24V DC constant-voltage LED driver sized for the total wattage (about 30 W/m, plus around 20% headroom). Ask us to size the driver and wiring for your run length.

Will I see voltage drop on a long run?

DC strips can dim at the far end of a long run. Re-feed power at the recommended intervals and use the correct cable size; we confirm the layout for your project.

Is this strip waterproof?

Check the IP rating for the specific model. IP-rated variants and sealed connectors are available for outdoor or wet locations; ask us to confirm the correct version.

Can I cut it on site?

Yes, cut only at the marked cut points, then reconnect with matching connectors. The cut interval is shown on the model datasheet.

Which colour temperatures are available?

2700K;3000K;4000K;6500K