info@arraystarled.com
Email Us
The ART-HSC0B10-400-W-110 is an Arraystar High Voltage COB LED Strip. It uses COB (chip on board)s at 400 LEDs/m, on 110V AC (90-130V), drawing around 12 W/m, in 2700K / 3000K / 4000K / 6000K, delivering a continuous, dot-free line, rated IP67.
It features CRI >80, a 10 mm profile, supplied not specified. Because it runs on mains voltage, it covers long building outlines with fewer power feeds than a low-voltage strip.
No. It runs directly on mains voltage (110V AC (90-130V)), so it suits long runs without a driver every few metres. A qualified electrician must fit the rated mains head connector and weatherproof junction.
High-voltage operation allows long single-feed runs (typically Not specified). Always observe the maximum run and use the rated head connector.
It carries an IP67 rating. Outdoor or wet installations still need sealed connectors and proper end sealing to maintain the rating.
2700K / 3000K / 4000K / 6000K
It is supplied in rated run lengths with the mains head connector fitted and sealed. Do not cut the high-voltage strip on site; tell us the lengths you need and we supply them ready to install.