info@arraystarled.com
Email Us
220V IP67 Solid Silicone Extrusion COB LED Strip 480 LED 8mm
- Model:ART-COB08HS-480-X-220
- LED Type:COB LED
- LED Qty/M:480 LEDs/m
- Voltage:220V AC
- Power W/m:10W/m
- CCT/Color:3000K/4000K/6000K
- CRI:90
- Dimension:8 mm PCB
- Warranty:3 years
Product Description
When you want a continuous dot-free line that plugs straight into mains without a low-voltage driver every few meters, this high-voltage COB is the answer. The 8mm board packs 480 LEDs/m at just 10W/m, runs directly on 220V AC, and is sealed in solid silicone to IP67 with CRI 90.
How a 220V COB strip works
Low-voltage strips need a driver that converts mains to 12/24V, and on long runs you inject power repeatedly. A high-voltage COB strip has the conversion handled along the strip, so it connects to 220V AC at the head and runs a long continuous line from one feed — far less wiring on building outlines and long corridors. The solid silicone extrusion makes it IP67 and keeps the dense COB face dot-free and protected.
Key Features
- Direct 220V AC — no low-voltage driver per run
- 480 LEDs/m COB, dot-free, only 10W/m
- Solid silicone extrusion, IP67 sealed
- CRI 90; 3000K / 4000K / 6500K
- Long continuous runs from a single mains feed
Typical Applications
- Long building outlines and rooflines
- Corridors, tunnels, and perimeter lighting
- Covered exterior architectural trim
- Large cove runs where driver placement is awkward
Specifications
| Parameter | Value |
|---|---|
| Model | ART-COB08HS-480-X-220 |
| LED type | COB LED |
| LED quantity | 480 LEDs/m |
| PCB width | 8 mm |
| Power | 10 W/m |
| Voltage | 220V AC |
| IP rating | IP67 solid silicone |
| CRI | 90 |
| CCT | 3000K / 4000K / 6500K |
| Warranty | 3 years |
Installation notes
- Mains-voltage wiring must be done by a qualified electrician with the rated connectors and junction boxes.
- Use the supplied rectifier/head connector; never connect the bare strip directly to mains.
- Keep joins and cut ends sealed to maintain IP67.
- Mount in a profile or clips rated for the strip; don't cut into live sections.
Frequently Asked Questions
Do I still need a driver?
You don't use a separate low-voltage driver; the strip's head connector handles mains, but it must be installed by an electrician.
How long can one run be?
High-voltage strips support much longer runs from one feed than 24V; follow the rated maximum run length for this model.
Is it safe outdoors?
The IP67 silicone body suits damp and covered outdoor locations; maintain sealed ends and connectors.
Can I order custom specifications or OEM branding?
Yes. As the manufacturer we support custom lengths, colour temperature, CRI, packaging and OEM labeling; send us your specification.
Can I request a sample before a bulk order?
Yes, samples are available so you can confirm the colour, build and output before a bulk order. Request a sample through our contact page.