High-Voltage Mining LED Strip Light

Product Description

This high-voltage mining LED strip light is built for continuous illumination in underground tunnels and industrial aisles. It uses SMD 2835s at 120 LEDs/m, on 220V AC (200-240V), drawing around 15 W/m, in 2700K / 3000K / 4000K / 6000K / single colors, rated IP67.

It features CRI >80, a Not specified profile, supplied not specified. Its high-voltage design supports long runs with fewer power points, and the sealed construction stands up to the wet, dusty tunnel environment.

Key Features

• SMD 2835 at 120 LEDs/m
• Input: 220V AC (200-240V)
• Power: 15 W/m
• CRI >80
• Colour options: 2700K / 3000K / 4000K / 6000K / single colors
• IP67 sealed construction
• Strip width Not specified
• Warranty: 3 years

Typical Applications

• Underground mining tunnels and drifts
• Industrial and warehouse aisle lighting
• Tunnel and culvert lighting
• Continuous wet and dusty operating environments
• High-voltage long-run site lighting

Frequently Asked Questions

Do I need an LED driver for this strip?

No. It runs directly on mains voltage (220V AC (200-240V)), so it suits long runs without a driver every few metres. A qualified electrician must fit the rated mains head connector and weatherproof junction.

How far can it run from one power feed?

High-voltage operation allows long single-feed runs (typically Not specified). Always observe the maximum run and use the rated head connector.

Is this strip suitable for outdoor use?

It carries an IP67 rating. Outdoor or wet installations still need sealed connectors and proper end sealing to maintain the rating.

Can I cut it on site?

Cut only at the marked points, then reseal the cut end with the rated end cap to keep the full encapsulation; ask us for the sealing details.

Which colour temperatures are available?

2700K / 3000K / 4000K / 6000K / single colors