High-Voltage Mining LED Strip Light

Product Description

This high-voltage mining LED strip light is built for continuous illumination in underground tunnels and industrial aisles. It uses 2835s at 240LEDs/m, on 200-240V AC, drawing around 14 W/m, in 1800K, 2700K, 3000K, 4000K, 6000K.

It features CRI >80, a 15*8mm profile. Its high-voltage design supports long runs with fewer power points, and the sealed construction stands up to the wet, dusty tunnel environment.

Key Features

• 2835 at 240LEDs/m
• Input: 200-240V AC
• Power: 14 W/m
• CRI >80
• Colour options: 1800K, 2700K, 3000K, 4000K, 6000K
• Warranty: 3 Years

Typical Applications

• Underground mining tunnels and drifts
• Industrial and warehouse aisle lighting
• Tunnel and culvert lighting
• Continuous wet and dusty operating environments
• High-voltage long-run site lighting

Frequently Asked Questions

Do I need an LED driver for this strip?

No. It runs directly on mains voltage (200-240V AC), so it suits long runs without a driver every few metres. A qualified electrician must fit the rated mains head connector and weatherproof junction.

How far can it run from one power feed?

High-voltage operation allows long single-feed runs (typically the rated run length). Always observe the maximum run and use the rated head connector.

Is this strip waterproof?

Check the IP rating for the specific model. IP-rated variants and sealed connectors are available for outdoor or wet locations; ask us to confirm the correct version.

Can I cut it on site?

Cut only at the marked points, then reseal the cut end with the rated end cap to keep the full encapsulation; ask us for the sealing details.

Which colour temperatures are available?

1800K, 2700K, 3000K, 4000K, 6000K