info@arraystarled.com
Email Us
Overview
This touch dimmer is a compact switch for controlling cabinet and furniture strips: a single touch turns the light on or off, and a press-and-hold dims it up or down. It runs on 12–24V at up to 5A, so it sits between the driver and the strip without a bulky controller.
Where a touch switch fits
Built-in furniture and mirror lighting often has no room for a wall dimmer, and a mechanical switch spoils a clean surface. A touch sensor mounts behind a panel or mirror glass: the user touches the surface to switch and holds to dim, with the electronics hidden. The 5A output covers typical single-run strips on 12 or 24V.
Key features
- Touch on/off, press-and-hold dimming
- 12–24V input, up to 5A output
- Memory of last brightness
- Hides behind panels and mirror glass
- Compact in-line wiring
Typical applications
- Bathroom mirrors and vanity lighting
- Wardrobe and cabinet built-ins
- Kitchen furniture with hidden controls
- Single-run strips needing simple dimming
Specifications
| Parameter | Value |
|---|---|
| Model | ART-9030-Touch |
| Input/output | 12–24V, up to 5A |
| Control | Touch switch + hold to dim |
| Memory | Last level retained |
| Mounting | Behind panel/glass |
Installation notes
- Mount the sensor against a non-metallic surface; metal blocks touch sensing.
- Keep within 5A (60W at 12V / 120W at 24V) or add an amplifier.
- Wire between driver and strip with correct polarity.
- Test touch sensitivity through the finished panel before sealing.
FAQ
How many watts can it handle?
At 5A that's 60W on 12V or 120W on 24V; beyond that add a power amplifier.
Will it work through glass?
Yes, it's designed to sense through thin non-metallic panels and mirror glass within its range.
Does it remember the dim level?
Yes, it returns to the last brightness after switching off.