3D Bend LED Neon Strip

Product Description

The ART-3D1010-X is an Arraystar 3D Bend LED Neon Strip. It uses SMD 2835s at 168 LEDs/m (12V) / 140 LEDs/m (24V), on 12V / 24V DC, drawing around 9.6 W/m, in 1800K / 2700K / 3000K / 4000K / 6000K / RGB / tunable, rated IP67.

It features CRI >90 (white), a 10 mm profile, supplied not specified. The silicone body gives a smooth neon glow without visible LED dots, and it bends to follow signs and architectural outlines.

Key Features

• SMD 2835 at 168 LEDs/m (12V) / 140 LEDs/m (24V)
• Input: 12V / 24V DC
• Power: 9.6 W/m
• CRI >90 (white)
• Colour options: 1800K / 2700K / 3000K / 4000K / 6000K / RGB / tunable
• IP67 sealed construction
• Strip width 10 mm
• Warranty: 3 years

Typical Applications

• Building and facade outlines
• Signage, channel letters and logos
• Hotels, bars and leisure interiors
• Landscape and bridge contour lighting
• Festive and architectural decoration

Frequently Asked Questions

What power supply does this strip need?

A 12V / 24V DC constant-voltage LED driver sized for the total wattage (about 9.6 W/m, plus around 20% headroom). Ask us to size the driver and wiring for your run length.

Will I see voltage drop on a long run?

DC strips can dim at the far end of a long run. Re-feed power at the recommended intervals and use the correct cable size; we confirm the layout for your project.

Is this strip suitable for outdoor use?

It carries an IP67 rating. Outdoor or wet installations still need sealed connectors and proper end sealing to maintain the rating.

Can I cut it on site?

Yes, cut only at the marked cut points, then reconnect with matching connectors. The cut interval is shown on the model datasheet.

How do I control the colours?

Use a matching RGB/RGBW controller or DMX/SPI system. We can supply the controller and wiring matched to this strip.