3D Bend LED Neon Strip

Product Description

The ART-3D1616-X is an Arraystar 3D Bend LED Neon Strip. It uses 2835s at 140LEDs/m, on 12V DC 24V DC, drawing around 12W/m, in 1800K, 2700K, 3000K, 4000K, 6000K.

It features CRI >90, a 16*16mm profile. The silicone body gives a smooth neon glow without visible LED dots, and it bends to follow signs and architectural outlines.

Key Features

• 2835 at 140LEDs/m
• Input: 12V DC 24V DC
• Power: 12W/m
• CRI >90
• Colour options: 1800K, 2700K, 3000K, 4000K, 6000K
• Warranty: 3 Years

Typical Applications

• Building and facade outlines
• Signage, channel letters and logos
• Hotels, bars and leisure interiors
• Landscape and bridge contour lighting
• Festive and architectural decoration

Frequently Asked Questions

What power supply does this strip need?

A 12V DC 24V DC constant-voltage LED driver sized for the total wattage (about 12W/m, plus around 20% headroom). Ask us to size the driver and wiring for your run length.

Will I see voltage drop on a long run?

DC strips can dim at the far end of a long run. Re-feed power at the recommended intervals and use the correct cable size; we confirm the layout for your project.

Is this strip waterproof?

Check the IP rating for the specific model. IP-rated variants and sealed connectors are available for outdoor or wet locations; ask us to confirm the correct version.

Can I cut it on site?

Yes, cut only at the marked cut points, then reconnect with matching connectors. The cut interval is shown on the model datasheet.

Which colour temperatures are available?

1800K, 2700K, 3000K, 4000K, 6000K