IP68 Full Silicon Extrusion LED Neon Strip

Product Description

The ART-NS0612-IP68 is an Arraystar IP68 Full Silicone LED Neon Strip. It uses SMD 2835 / 3838 (SPI)s at 126-240 LEDs/m by version, on 12V / 24V DC, drawing around 12 W/m (RGB/SPI up to 15 W/m), in 1800K / 2700K / 3000K / 4000K / 6000K / RGB / SPI RGB, rated IP68.

It features CRI >90 (white), a 6 mm profile, supplied not specified. The silicone body gives a smooth neon glow without visible LED dots, and it bends to follow signs and architectural outlines.

Key Features

• SMD 2835 / 3838 (SPI) at 126-240 LEDs/m by version
• Input: 12V / 24V DC
• Power: 12 W/m (RGB/SPI up to 15 W/m)
• CRI >90 (white)
• Colour options: 1800K / 2700K / 3000K / 4000K / 6000K / RGB / SPI RGB
• IP68 sealed construction
• Strip width 6 mm
• Warranty: 3 years

Typical Applications

• Building and facade outlines
• Signage, channel letters and logos
• Hotels, bars and leisure interiors
• Landscape and bridge contour lighting
• Festive and architectural decoration

Frequently Asked Questions

What power supply does this strip need?

A 12V / 24V DC constant-voltage LED driver sized for the total wattage (about 12 W/m (RGB/SPI up to 15 W/m), plus around 20% headroom). Ask us to size the driver and wiring for your run length.

Will I see voltage drop on a long run?

DC strips can dim at the far end of a long run. Re-feed power at the recommended intervals and use the correct cable size; we confirm the layout for your project.

Is this strip suitable for outdoor use?

It carries an IP68 rating. Outdoor or wet installations still need sealed connectors and proper end sealing to maintain the rating.

Can I cut it on site?

Yes, cut only at the marked cut points, then reconnect with matching connectors. The cut interval is shown on the model datasheet.

What controller or protocol does it need?

It is addressable, so use a compatible controller for the IC/protocol of the ordered model. Confirm the protocol with us and we can supply the matching controller.