IP68 Full Silicon Extrusion LED Neon Strip

Product Description

The ART-NS1010-IP68 is an Arraystar IP68 Full Silicone LED Neon Strip. It uses 2835s at 140LEDs/m, on 12V DC 24V DC, drawing around 10 W/m, in 1800K, 2700K, 3000K, 4000K, 6000K, rated IP68.

It features CRI >90, a 10*10mm profile. The silicone body gives a smooth neon glow without visible LED dots, and it bends to follow signs and architectural outlines.

Key Features

• 2835 at 140LEDs/m
• Input: 12V DC 24V DC
• Power: 10 W/m
• CRI >90
• Colour options: 1800K, 2700K, 3000K, 4000K, 6000K
• IP68 sealed construction
• Warranty: 3 Years

Typical Applications

• Building and facade outlines
• Signage, channel letters and logos
• Hotels, bars and leisure interiors
• Landscape and bridge contour lighting
• Festive and architectural decoration

Frequently Asked Questions

What power supply does this strip need?

A 12V DC 24V DC constant-voltage LED driver sized for the total wattage (about 10 W/m, plus around 20% headroom). Ask us to size the driver and wiring for your run length.

Will I see voltage drop on a long run?

DC strips can dim at the far end of a long run. Re-feed power at the recommended intervals and use the correct cable size; we confirm the layout for your project.

Is this strip suitable for outdoor use?

It carries an IP68 rating. Outdoor or wet installations still need sealed connectors and proper end sealing to maintain the rating.

Can I cut it on site?

Yes, cut only at the marked cut points, then reconnect with matching connectors. The cut interval is shown on the model datasheet.

Which colour temperatures are available?

1800K, 2700K, 3000K, 4000K, 6000K