info@arraystarled.com
Email Us
| Model | ART-NS1220-84-DMX512RGBW-24 |
|---|---|
| LED Type | 5050 |
| LED Density | 84LEDs/m |
| Voltage | 12V DC 24V DC |
| Power (W/m) | 20 W/m |
| CCT/Colour | DMX512 RGBW |
| CRI | / |
| Dimension | 12*20mm |
| Warranty | 3 Years |
| Minimum Order Quantity | Factory-direct - on request |
| Certifications | CE, RoHS, UKCA; UL 1598C (Cert. E501132, selected models) |
The ART-NS1220-84-DMX512RGBW-24 is an Arraystar Pixel LED Neon Strip. It uses 5050s at 84LEDs/m, on 12V DC 24V DC, drawing around 20 W/m, in DMX512 RGBW.
It features a 12*20mm profile. The silicone body gives a smooth neon glow without visible LED dots, and it bends to follow signs and architectural outlines.
A 12V DC 24V DC constant-voltage LED driver sized for the total wattage (about 20 W/m, plus around 20% headroom). Ask us to size the driver and wiring for your run length.
DC strips can dim at the far end of a long run. Re-feed power at the recommended intervals and use the correct cable size; we confirm the layout for your project.
Check the IP rating for the specific model. IP-rated variants and sealed connectors are available for outdoor or wet locations; ask us to confirm the correct version.
Yes, cut only at the marked cut points, then reconnect with matching connectors. The cut interval is shown on the model datasheet.
It is addressable, so use a compatible controller for the IC/protocol of the ordered model. Confirm the protocol with us and we can supply the matching controller.