Black Silicone LED Neon Tube

Technical Specifications

Product Description

The ART-4025 RGB is an Arraystar Black Silicone Neon Tube.

It features a 20mm profile, supplied 30m/ctn. The silicone body gives a smooth neon glow without visible LED dots, and it bends to follow signs and architectural outlines.

Key Features

• Strip width 20mm
• Cuttable at marked points
• Available in fixed and IP-rated variants
• Suitable for cove, linear and accent lighting
• OEM/ODM and bulk supply available

Typical Applications

• Neon-style signage and outline letters
• Building perimeter and roofline tracing
• Leisure, hospitality and themed interiors
• Outdoor contour and landscape lighting
• Decorative cove and edge lighting

Frequently Asked Questions

What power supply does this strip need?

A a low-voltage DC supply constant-voltage LED driver sized for the total wattage with around 20% headroom. Ask us to size the driver and wiring for your run length.

Will I see voltage drop on a long run?

For DC runs we recommend re-feeding power at the recommended intervals (usually every 5m) to keep the light even to the end. Our team confirms the feed points for your layout.

Is this strip waterproof?

Check the IP rating for the specific model. IP-rated variants and sealed connectors are available for outdoor or wet locations; ask us to confirm the correct version.

Can I cut it on site?

Yes, cut only at the marked cut points, then reconnect with matching connectors. The cut interval is shown on the model datasheet.

How do I control the colours?

Use a matching RGB/RGBW controller or DMX/SPI system. We can supply the controller and wiring matched to this strip.