Common LED Strip Neon Tube

Product Description

The ART-NT15 is an Arraystar LED Neon Tube. It uses Not specified - sleeve/housing, no LEDs includeds at Not specified, on Not specified, drawing around Not specified, in Not specified (transparent / milky white housing).

It features a 15 mm profile, supplied 200 m/roll, 4 rolls/carton. The silicone body gives a smooth neon glow without visible LED dots, and it bends to follow signs and architectural outlines.

Key Features

• Not specified - sleeve/housing, no LEDs included at Not specified
• Input: Not specified
• Power: Not specified
• Colour options: Not specified (transparent / milky white housing)
• Strip width 15 mm
• Warranty: 3 years

Typical Applications

• Neon-style signage and outline letters
• Building perimeter and roofline tracing
• Leisure, hospitality and themed interiors
• Outdoor contour and landscape lighting
• Decorative cove and edge lighting

Frequently Asked Questions

What power supply does this strip need?

A Not specified constant-voltage LED driver sized for the total wattage (about Not specified, plus around 20% headroom). Ask us to size the driver and wiring for your run length.

Will I see voltage drop on a long run?

For DC runs we recommend re-feeding power at the recommended intervals (usually every 5m) to keep the light even to the end. Our team confirms the feed points for your layout.

Is this strip waterproof?

Check the IP rating for the specific model. IP-rated variants and sealed connectors are available for outdoor or wet locations; ask us to confirm the correct version.

Can I cut it on site?

Yes, cut only at the marked cut points, then reconnect with matching connectors. The cut interval is shown on the model datasheet.

Which colour temperatures are available?

Not specified (transparent / milky white housing)