info@arraystarled.com
Email Us
220V AC High Voltage SOB LED Strip Light
- Model:ART-SOB0510-240-X-220V
- LED Type:SMD 2835
- LED Qty/M:240 LEDs/m
- Voltage:200–240V AC
- Power W/m:8W/m
- CCT/Color:2700K / 3000K / 4000K / 6000K
- CRI:80
- Dimension:5×10mm
- Warranty:3 Years
Product Description
The ART-SOB0510-240-X-220V is an Arraystar 2835 SMD LED Strip. It uses SMD 2835s at 240 LEDs/m, on 200–240V AC, drawing around 8W/m, in 2700K / 3000K / 4000K / 6000K.
It features CRI 80, a 5mm profile, supplied 5m/roll. Because it runs on mains voltage, it covers long building outlines with fewer power feeds than a low-voltage strip.
Key Features
- SMD 2835 at 240 LEDs/m
- Input: 200–240V AC
- Power: 8W/m
- CRI 80
- Colour options: 2700K / 3000K / 4000K / 6000K
- Strip width 5mm
- Warranty: 3 Years
Typical Applications
- Under-cabinet and cove lighting in kitchens and retail
- Furniture, shelving and display case lighting
- Hotel, bar and restaurant interior accents
- Architectural recessed linear lighting
- Signage backlighting and decorative outlines
Frequently Asked Questions
Do I need an LED driver for this strip?
No. It runs directly on mains voltage (200–240V AC), so it suits long runs without a driver every few metres. A qualified electrician must fit the rated mains head connector and weatherproof junction.
How far can it run from one power feed?
High-voltage operation allows long single-feed runs (typically 5m/roll). Always observe the maximum run and use the rated head connector.
Is this strip waterproof?
Check the IP rating for the specific model. IP-rated variants and sealed connectors are available for outdoor or wet locations; ask us to confirm the correct version.
Can I cut it on site?
Yes, cut only at the marked cut points, then reconnect with matching connectors. The cut interval is shown on the model datasheet.
Which colour temperatures are available?
2700K / 3000K / 4000K / 6000K