2835 SMD LED Strip

Product Description

The ART-2835-120-RGB-24 is an Arraystar 2835 SMD LED Strip. It uses SMD 2835s at 120, on 24V DC, drawing around 14.4W/m, in RGB.

It features an 8mm, 10mm profile. It is a flexible, cuttable strip for linear, cove and accent lighting.

Key Features

• SMD 2835 at 120
• Input: 24V DC
• Power: 14.4W/m
• Colour options: RGB
• Warranty: 3 years
• Cuttable at marked points

Typical Applications

• Under-cabinet and cove lighting in kitchens and retail
• Furniture, shelving and display case lighting
• Hotel, bar and restaurant interior accents
• Architectural recessed linear lighting
• Signage backlighting and decorative outlines

Frequently Asked Questions

What power supply does this strip need?

A 24V DC constant-voltage LED driver sized for the total wattage (about 14.4W/m, plus around 20% headroom). Ask us to size the driver and wiring for your run length.

Will I see voltage drop on a long run?

DC strips can dim at the far end of a long run. Re-feed power at the recommended intervals and use the correct cable size; we confirm the layout for your project.

Is this strip waterproof?

Check the IP rating for the specific model. IP-rated variants and sealed connectors are available for outdoor or wet locations; ask us to confirm the correct version.

Can I cut it on site?

Yes, cut only at the marked cut points, then reconnect with matching connectors. The cut interval is shown on the model datasheet.

How do I control the colours?

Use a matching RGB/RGBW controller or DMX/SPI system. We can supply the controller and wiring matched to this strip.