2835 SMD LED Strip

Product Description

The ART-2835-120-P-24 is an Arraystar 2835 SMD LED Strip. It uses SMD 2835s at 120 LEDs/m, on 24V DC, drawing around 9.6 W/m, in Purple / pink spectrum, rated IP20.

It features CRI Not applicable (colored), an 8 mm profile, supplied not specified. It is a flexible, cuttable strip for linear, cove and accent lighting.

Key Features

• SMD 2835 at 120 LEDs/m
• Input: 24V DC
• Power: 9.6 W/m
• CRI Not applicable (colored)
• Colour options: Purple / pink spectrum
• IP20 sealed construction
• Strip width 8 mm
• Warranty: 3 years

Typical Applications

• Under-cabinet and cove lighting in kitchens and retail
• Furniture, shelving and display case lighting
• Hotel, bar and restaurant interior accents
• Architectural recessed linear lighting
• Signage backlighting and decorative outlines

Frequently Asked Questions

What power supply does this strip need?

A 24V DC constant-voltage LED driver sized for the total wattage (about 9.6 W/m, plus around 20% headroom). Ask us to size the driver and wiring for your run length.

Will I see voltage drop on a long run?

DC strips can dim at the far end of a long run. Re-feed power at the recommended intervals and use the correct cable size; we confirm the layout for your project.

Is this strip suitable for outdoor use?

It carries an IP20 rating. Outdoor or wet installations still need sealed connectors and proper end sealing to maintain the rating.

Can I cut it on site?

Yes, cut only at the marked cut points, then reconnect with matching connectors. The cut interval is shown on the model datasheet.

Which colour temperatures are available?

Purple / pink spectrum