2835 SMD LED Strip

Product Description

The ART-SOB0710-240-X-24V is an Arraystar 2835 SMD LED Strip. It uses SMD 2835s at 240 LEDs/M, on 24V DC, drawing around 11W/m, in 2700K / 3000K / 4000K / 6000K.

It features CRI 80, a 5mm profile, supplied 5m/roll. It is a flexible, cuttable strip for linear, cove and accent lighting.

Key Features

• SMD 2835 at 240 LEDs/M
• Input: 24V DC
• Power: 11W/m
• CRI 80
• Colour options: 2700K / 3000K / 4000K / 6000K
• Strip width 5mm
• Warranty: 3 Years

Typical Applications

• Under-cabinet and cove lighting in kitchens and retail
• Furniture, shelving and display case lighting
• Hotel, bar and restaurant interior accents
• Architectural recessed linear lighting
• Signage backlighting and decorative outlines

Frequently Asked Questions

What power supply does this strip need?

A 24V DC constant-voltage LED driver sized for the total wattage (about 11W/m, plus around 20% headroom). Ask us to size the driver and wiring for your run length.

Will I see voltage drop on a long run?

For DC runs we recommend re-feeding power at the recommended intervals (usually every 5m) to keep the light even to the end. Our team confirms the feed points for your layout.

Is this strip waterproof?

Check the IP rating for the specific model. IP-rated variants and sealed connectors are available for outdoor or wet locations; ask us to confirm the correct version.

Can I cut it on site?

Yes, cut only at the marked cut points, then reconnect with matching connectors. The cut interval is shown on the model datasheet.

Which colour temperatures are available?

2700K / 3000K / 4000K / 6000K