2835 SMD LED Strip

Product Description

The ART-2835-240-W+WW-24 is an Arraystar 2835 SMD LED Strip. It uses 2835 SMD LEDs at 240 LEDs/m, on DC24V, drawing around 16W/m, in 2700K–6000K Adjustable.

It features CRI >90, an 8mm profile, supplied 5m/roll. It is a flexible, cuttable strip for linear, cove and accent lighting.

Key Features

• 2835 SMD LED at 240 LEDs/m
• Input: DC24V
• Power: 16W/m
• CRI >90
• Colour options: 2700K–6000K Adjustable
• Strip width 8mm
• Warranty: 5 Years

Typical Applications

• Under-cabinet and cove lighting in kitchens and retail
• Furniture, shelving and display case lighting
• Hotel, bar and restaurant interior accents
• Architectural recessed linear lighting
• Signage backlighting and decorative outlines

Frequently Asked Questions

What power supply does this strip need?

A DC24V constant-voltage LED driver sized for the total wattage (about 16W/m, plus around 20% headroom). Ask us to size the driver and wiring for your run length.

Will I see voltage drop on a long run?

For DC runs we recommend re-feeding power at the recommended intervals (usually every 5m) to keep the light even to the end. Our team confirms the feed points for your layout.

Is this strip waterproof?

Check the IP rating for the specific model. IP-rated variants and sealed connectors are available for outdoor or wet locations; ask us to confirm the correct version.

Can I cut it on site?

Yes, cut only at the marked cut points, then reconnect with matching connectors. The cut interval is shown on the model datasheet.

Which colour temperatures are available?

2700K–6000K Adjustable