High-Efficacy 2835 LED Strips for EPC Lighting Retrofits
- 2026-11-16 10:02
- /
- Arraystar LED
In an Energy Performance Contracting (EPC) deal, the strip's efficacy and service life decide how quickly the energy savings pay back. This guide matches three Arraystar 24V DC SMD 2835 strips to retrofit budgets, using only the published strip-level specifications.

Why strip efficacy matters in an EPC contract
An EPC provider is paid from the energy the installation saves. The higher a strip's luminous efficacy (lm per watt), the fewer watts are needed to reach the target illuminance, which lowers the kilowatt-hour draw the contract is measured against. Reliability matters for the same reason: premature failure or fast lumen depreciation means call-backs and maintenance labour that erode the recurring margin on the project.
When comparing strips, read the strip-level efficacy rather than a bare LED bin rating. The figures below are the strip-level values listed on each product page. All three models run on 24V DC, carry CRI >90, and come with a 3-year warranty.
The three 2835 options at a glance
All three use a 10 mm PCB, SMD 2835, IP20 indoor rating.
| Model | Voltage | Power | LEDs/m | Cut length | CRI | Strip efficacy |
|---|---|---|---|---|---|---|
| ART-HE2835-168-X-24 | 24V DC | 18 W/m | 168 | 41.66 mm | >90 | 140 lm/W |
| ART-HE2835-240-X-24 | 24V DC | 19.2 W/m | 240 | 33.33 mm | >90 | 140 lm/W (std) / 200 lm/W (high-efficacy bin) |
| ART-HE2835-180-X-24 | 24V DC | 9.6 W/m | 180 | 50 mm | >90 | 140 lm/W |
Which model fits which space
ART-HE2835-168-X-24 — balanced general-purpose line
168 LEDs/m at 18 W/m on a 24V DC feed. It suits residential corridors, back-of-house areas and coves where a balanced LED density is enough rather than the tightest possible dot pitch.
ART-HE2835-240-X-24 — high-density, high-efficacy option
240 LEDs/m at 19.2 W/m for a closer dot spacing on longer viewing distances and more uniform lines. It is offered in a 140 lm/W standard bin and a 200 lm/W high-efficacy (-02) bin, so the spec can be matched to the power budget rather than ordered at one fixed output.
ART-HE2835-180-X-24 — low-wattage ERP Listed strip
180 LEDs/m at only 9.6 W/m, cuttable every 50 mm. This is the ERP Listed model in the group, aimed at commercial offices, retail spaces and residential retrofits where the power budget is the binding constraint.
Before you specify
- Work out the target illuminance and layout first; size the driver for the total wattage plus a safety margin, and plan runs for voltage drop on the 24V DC feed.
- The IP20 rating is for indoor, dry locations only. Wet or exposed locations need a waterproof series or a sealed channel.
- CRI >90 keeps finishes, merchandise and wall colours rendering accurately in display and hospitality spaces.
- Confirm which efficacy bin you are quoting on the 240 model: the standard 140 lm/W bin or the 200 lm/W high-efficacy (-02) bin.
Recommended Products
Frequently Asked Questions
What efficacy do these 2835 strips deliver?
The 168 and 180 models are rated at 140 lm/W at strip level. The 240 model comes in a 140 lm/W standard bin and a 200 lm/W high-efficacy (-02) bin. These are strip-level figures, not bare LED bin ratings.
Are these strips 24V or 48V?
All three models are 24V DC. If your layout needs a longer single feed, ask our engineering team about the separate long-distance strip options.
Which of these is ERP Listed?
The ART-HE2835-180-X-24 is the ERP Listed model in this group. The 168 and 240 are high-efficiency 2835 strips.
What CRI and warranty apply?
All three models carry CRI >90 and a 3-year warranty.
Need help sizing an EPC lighting retrofit?
Send your layout and target illuminance for factory-direct pricing, free samples and engineering support within 24 hours. Datasheets and IES files are available on request.
Email: info@arraystarled.com | Phone: +86-0755-2103-6746 | WhatsApp: 0086 1581 8514 077
- Pre: 2020 Long-Run Neon: 20×20mm, 12W/m, Structural Fixing
- Next: Sorry!









