LED Strip Lighting Blog & Buying Guides

2026-10-28

Brand guidelines give a Pantone; neon physics gives a close cousin. I set expectations and pick the closest standard tube.

2026-10-28

A neon sign above a fuel dispenser is a code conversation, not a lighting choice. I explain where NE/Ex ratings apply.

2026-10-28

The wrong cloth or solvent clouds the diffuser permanently. This is the cleaning routine I hand to site managers.

2026-10-28

Silicone domes bend around curves; glass domes hold a crisp brand hue. I pick the material on the geometry and the viewing distance.

2026-10-28

A brushed or mirror backing doubles perceived glow for free. I cover when it helps and when it just creates glare.

2026-10-28

A 4m neon tube does not fit in a courier bag. I explain the cut-length limit, joint-in-the-middle trick, and freight rules.

2026-10-28

Clients ask for dimmable neon all the time. It works, but the dimming curve and the transformer rating are nothing like LED.

2026-10-28

After five winters on the same high street, the two technologies tell very different stories in maintenance cost. I compare the receipts.

2026-10-28

A dark section can mean a bad tube, a weak transformer, or a loose HV lead. I run through the quick diagnostic order I follow on site.

2026-10-28

Rooftop neon flexes in the wind. The break is almost always at the wire exit. I loop and service that loop every time.

2026-10-28

IP65 on a tube says nothing about condensation dripping inside the diffuser. Steam areas need vented ends and a dry driver.

2026-10-28

Suspended neon looks amazing until the hook pulls out of a plaster ceiling. I size the cable, the fixings and the strain relief.