-
2026-10-0930-Degree Lens Linear Profiles for Directed Task Light
When a linear fixture needs to aim at a work surface rather than shine straight down, a 30-degree lens profile points the beam where it is wanted and cuts.
view more >> -
2026-10-09Plaster-In Internal Corner Profiles for Seamless Drywall Lines
Straight trimless channels look great until you hit an inside corner, where light leaks and joints crack.
view more >> -
2026-10-09Asymmetric 1310 Angled Profiles for Wall Grazing
A flat-down channel lights the floor, not the wall. An asymmetric 1310 profile with an angled reflector throws light across a textured surface, and here is.
view more >> -
2026-10-0990-Degree Corner Connectors for LED Aluminum Channels
Cutting mitres on site is slow and rarely perfect. Purpose-made 90-degree corner connectors join channels cleanly and carry the diffuser around the bend, and.
view more >> -
2026-10-09Recessed Flexible Aluminum Channels for Neon in Walls
Curved plaster reveals need a channel that both bends and plasters in flush.
view more >> -
2026-10-09Flexible Stainless-Steel Channels for Curved Neon Signs
Rigid aluminium cannot follow a wavy logo or curved facade. A flexible stainless-steel channel bends by hand and holds neon on compound curves, and here is.
view more >> -
2026-10-09500W Waterproof LED Drivers for Large Outdoor Projects
A large facade or landscape run is cleaner on a few big waterproof drivers than a dozen small ones.
view more >> -
2026-10-09Triac-Dimmable LED Drivers for Existing Wall Dimmer Retrofits
Clients want to keep their existing wall dimmers. A Triac/ELV-dimmable driver works with phase-cut dimmers, but matching the minimum load is the part most.
view more >> -
2026-10-09DT8 DALI Dimmable Drivers for Tunable-White Fixtures
Tunable white over DALI used to consume two addresses per fixture.
view more >> -
2026-10-09Through-Panel Hidden Touch Sensors for Seamless Furniture
Visible switches break the look of high-end cabinetry. A through-panel touch sensor works through wood, glass or stone so the surface stays clean, and here.
view more >> -
2026-10-09Touch Dimmer Sensor Switches: Wiring a 5A Under-Cabinet Circuit
A single 5A touch dimmer can run a whole run of under-cabinet light, but overloading it causes flicker and drop-out.
view more >> -
2026-10-09Rechargeable Wireless PIR Sensors for Retrofitted Cabinets
Retrofitting lighting into existing furniture usually means no wires are available.
view more >>
